How to Fix Water Damaged Wood Floor

how to fix water damaged wood floor
how to fix water damaged wood floor

You most likely worry about the consequences if your home has a lot of water on its wood floors. Because water damaged may affect almost anything in a home, it is one of the top concerns for homeowners worldwide. For instance, improper handling of water-damaged hardwood floors can cause warping, the growth of mold, and a significant reduction in the value of your home. The good news is that water damaged to wood floors may be repaired.

How Long Does it Take for Water To Damage Hardwood Floors?

The location of the water damaged will determine how long it takes for hardwood floors to be damaged by water. Usually, the tops of the boards are coated to assist prevent water leaks onto hardwood floors, especially in the case of minor spills. But a lot of water will still trickle beneath the boards and soak in between them. The boards’ untreated sections will expand after absorbing water. The sooner the water damage in the wood floor is repaired, the more likely it is to be salvaged.

To reduce the amount of water damaged to hardware, you should ideally contact a qualified water damage mitigation service as soon as possible after a significant water disaster, such as a flood, leak, or burst pipe.

Signs of Water Damage on Wood Floor

An odor emanating from below hardwood floors could be the first indication of water damage. This can be a sign of mildew or moisture developing beneath your wooden floors. It is best to get in touch with an expert right away so they can evaluate the damage before doing any repairs. Additionally, check for hardwood floor crowning. Crowning indicates that rather than the moisture content being at the bottom of the floor, it is most likely at the top. Water spills or high moisture content can lead to crowning on hardwood floors.

Additional Signs of Water Damage on Wood Floor

  • Discoloration to wood floor
  • Mold
  • Staining to wood floor
  • Buckling of wood floor
  • lifting of floor board and nails

Does Water Damage Wood Floors?

Because hardwood floors are porous, moisture can permeate a plank after it has absorbed it, causing swelling in some places while leaving other regions dry. This typically results in unattractive bulges as water accumulates over time on your wood floor, further aggravating the wear!

How to Fix Water Damaged Hardwood Floor

Elevated humidity is the most frequent cause of swelling on wood flooring. To fix it, cover the swollen area with thick towels, run a dehumidifier to eliminate any extra moisture from the ventilation or air conditioning system in your home, and then run an upright vacuum over these areas until the swelling subsides.

How to Reduce and Repair Water Damage to Hardwood Floors

There are ways to lessen the damage and maybe avoid damaging your hardwood floor if you do have a significant spill, a leaking roof, or even a burst pipe in your home that necessitates water damage repair in hardware flooring. You can prevent water damaged flooring with the help of this 5-step drying technique!

1. Locate the water source

You must stop the source before you can begin drying anything out. Before beginning cleanup, check your roof for leaks, burst pipes, and weak points and make any necessary repairs. After all, while the water is still pouring in, there won’t be much you can do to stop the water damaged to the hardwood floors.

2. Take out wet items and dry floors

After that, you must relocate all wet items to a secure location so they can dry off. In addition to saving furniture and carpets, this will lessen the quantity of water that soaks into your flooring. Your wood floors may sustain potentially irreversible damage from a wet rug if you leave it alone.

Next, try to get rid of as much standing water as you can from the floors using whatever you have. Although laying down towels and rags may assist quite a deal, a wet-vac will work best. The primary objective is to eliminate the standing water; the floor will be fully dry later. This component need not be flawless.

3. Clean your Floors

Water is not the only item to be cautious of while repairing water damaged to wooden floors. In addition to your undesired moisture, there may be silt, dirt, or other organic components present, depending on the source. Cleaning your floors with a scrub removes these contaminants and helps shield your flooring from long-term harm.

4. Dry again and again

Drying your floors again is necessary after you’ve cleared, dried, and cleaned them. Continue using everything you have to wipe the floors. You need to remove water from all areas, such as under appliances or cabinets, if you want to preserve your wood floors.

To ensure that the floors are entirely dry, a moisture meter will be used. A dehumidifier can help eliminate a significant amount of extra moisture.

As many fans as you can should be installed and kept operating in the impacted region. To guarantee that your house is well-ventilated, open your windows. The floors will dry faster and there is a lower chance of serious wood damage if you can generate more moving air.

You’ve pretty well exhausted all of your options at this point to protect your wood floors. Making sure there is no damage that necessitates hiring experts is all that is left to do.

5. Finding the Mold

The most crucial thing to look out for, other than evident defects in the floors itself, is the growth of mold. If there is evidence of mold growth, you must act quickly to stop the mold from spreading and becoming a larger problem. Make sure there is no apparent mold in the pores of the grain or on the wood.

Throughout this entire process, you should keep your fans and dehumidifiers running. Mold thrives on moisture, so doing everything you can to make your flooring as dry and uninviting for spore growth as possible can save you troubles later. For additional mold assistance, contact Commercial Damage Restoration experts.

Use Water Vacuum

Another option to clean up water off of your wood floors is to use a water vacuum. A water vacuum is a great way to remove water from your wood floors. It works by sucking up all of the water in the area where it is placed. This allows you to clean up any spills, or water damage immediately. It also makes it easier to sweep up any excess water that may have accumulated on your floor.

How to Repair Water Damaged Swollen Wood Floor

Installing ventilation fans might help dry out your area if the floor has swelled due to humidity. To expedite the process and assist dry out the flooring, you can install a dehumidifier in the space.

How to Prevent Water Damage to Wood Floors

We have some ideas that can be helpful if you have water damaged to your wood floor and want to keep it from happening again, or if you just want to know the best ways to keep water damage from happening in the future.

Mats and Rugs

Place mats and rugs throughout the house as a means of preventing water damage to your hardwood floors. To prevent muddy, wet shoes from tracking across your wood floor, place a mat at each entrance. You should also place one beneath sinks, pet bowls, and faucets in case someone spills their drink there.

Examine Your Home

Make sure nothing leaks, such as pipes, that could result in flooding in your house or too much water dripping onto your hardwood floors.


Your hardwood floor will last longer and be better protected from moisture and other potential damage if you seal it every few years.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *